Last Update: 09/01/06
Online Apprentice-
Glue Fingerboard to the Neck Shaft
In this lesson we will glue fingerboard to the neck shaft
Make sure you have read this lesson all the way through before beginning the lesson.
|
|
Get you clamping cauls ready. Use wax paper between the internalcaul and the underside of the top. For the fretboard I use a 1" thick pice of plywood the length of the fingerboard and about 3" wide. |
|
|
Apply epoxy or the glue of your choice. Insert the paper clip locating pins. Then clamp the fingerboard and clean up the glue squeeze out. |
|
|
After 24 hours remove the clamps and admire your work. |
Online Apprentice Home page.
